Exchange 2013 Diagnostic Error 1006

These errors are occurring on my Exchange 2013 server every 15 minutes.  There are a number of similar errors associated with it but they are basically warning you that a problems is present. I checked into both of them further and found that there is no issue and that it appears that the Exchange 2013 Diagnostic services are false alarming.  This even occurred on a fully patched Exchange 2013 server with CU3 installed.  They can be ignored or you can use the procedure at the bottom of this FAQ to stop them from logging.

Log Name:      Application
Source:        MSExchangeDiagnostics
Date:          6/02/2014 2:55:49 PM
Event ID:      1006
Task Category: Triggers
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SERVER.DOMAIN.local
Description:
The performance counter ‘\\SERVER\LogicalDisk(HarddiskVolume2)\Free Megabytes’ sustained a value of ‘108.00’, for the ’15’ minute(s) interval starting at ‘6/02/2014 3:38:00 AM’. Additional information: None. Trigger Name:DatabaseDriveSpaceTrigger. Instance:harddiskvolume2

Log Name:      Application
Source:        MSExchangeDiagnostics
Date:          6/02/2014 2:55:49 PM
Event ID:      1006
Task Category: Triggers
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SERVER.DOMAIN.local
Description:
The performance counter ‘\\SERVER\MSExchangeIS Store(Test 2 MBX Database)\Logical To Physical Size Ratio’ sustained a value of ‘0.00’, for the ’10’ minute(s) interval starting at ‘6/02/2014 3:45:00 AM’. Additional information: None. Trigger Name:DatabaseLogicalPhysicalSizeRatioTrigger. Instance:test 2 mbx database

To suppress these alerts you need to modify the alert to disable it

1. Go to the path C:\Program Files\Microsoft\Exchange Server\V15\Bin
2. Locate the Microsoft.Exchange.Diagnostics.Service.exe.config file and open it with Notepad
3. Locate the line that starts with “<add Name="Microsoft.Exchange.Diagnostics.Service.ExchangeJobs.Triggers.DatabaseDriveSpaceTrigger"  and at the end of the line you will see Enabled=”True”.  Change it to be Enabled=”False”
4. If you have the second error above then also locate the line that starts with <add Name="Microsoft.Exchange.Diagnostics.Service.ExchangeJobs.Triggers.DatabaseLogicalPhysicalSizeRatioTrigger" and change the Enabled=”True” to Enabled=”False”
5. Save the file
6. Restart the Microsoft Exchange Diagnostics service and the errors should be gone.

No word from Microsoft on when this false alarm will be resolved.